Facebook Icon YouTube Icon LinkedIn Icon Twitter Icon RSS Icon
APE Partners Foundation Equipment Helmets to Hardhats I Make America Tracsa Sitsa MATRA

Vibratory Driver / Extractor Specifications



APE Model 3 Vibratory Driver/Extractor


SPECIFICATIONS DATA
Eccentric moment 30 in-lbs (0.35 kgm)
Driving Force 27 kN / 3 US tons
Frequency (variable) 0-3000 vpm
Hyd motor type Voac F11-10
Hydraulic motor displacement: cu/in/rev: 0.60
Pile Clamp Force 107 kN / 12 US tons
Maximum line pull 44 kN / 5 US tons
Suspended weight(without suppressor) 100 kg / 220 lbs
Suspended weight(with suppressor) 272 kg / 600 lbs
Length 44 cm / 17.5 in
Width 18 cm / 7 in
Height with clamp attachment 91 cm / 36 in
Height without clamp attachment 70 cm / 27.5 in

APE Model 10 Power Unit

SPECIFICATIONS DATA
Power Unit Engine YANMAR two stroke diesel
Engine oil capacity 4 US pints (1.0 litres)
Lubrication Full Pressure with Full flow filter
Maximum Power 10 Horsepower (7.46 kW)
Operating Speed (rpm) 400 to 3600
Hydraulic system type Open loop
Length 30 inches (762 mm)
Width 23 inches (584 mm)
Weight 250 lbs (113 Kg)
Maximum Hydraulic Flow 6 gpm (22.7 lpm)





Click here to view Pilebuck's comprehensive hammer specs

Specifications may vary due to site conditions, specific hammer conditions or product set up. Specifications may change without notice.
Consult the factory for details on any specific product (800) 248-8498.

APE Partners GSA SmartPay Deef Foundations Institute Pile Driving Contractors Association IMECO Collins Company Internation Association of Foundation Drilling Terresolve Foundation Associates SEMW